When a property in Galveston changes hands, gets rented out, or comes up for renovation, the electrical system is one of the first things that needs a clear picture. An inspection documents what is there: the panel condition, grounding and bonding, GFCI and AFCI protection at required locations, visible wiring throughout the property, and any code corrections the work turns up. That record matters to buyers, sellers, landlords, and anyone adding circuits to a building whose original wiring was not designed for today's loads.
We cover Galveston and the surrounding area every day from 7 AM to 8:30 PM. We handle the full range of residential and commercial electrical work, from a single outlet replacement to a panel upgrade to a whole-home rewire. Decisions about the work get made while you are on the phone, so when you call for a quote, you leave the conversation knowing what the job involves and what it will cost before anything is scheduled.
Not every electrical job requires the whole building to go dark. Replacing an outlet, adding a dedicated circuit, or swapping a breaker typically means isolating one circuit or one section of the panel. The rest of the building stays live. A full shutdown is needed when the service entrance is being worked on, when the panel itself is being replaced, or when rewiring runs through areas that cannot be safely isolated any other way.
Before the work starts, we talk through what will be off and for how long. That matters when someone is working from home and needs to know which circuits stay live, or when a business has equipment that cannot be interrupted without a planned window.
For commercial properties and occupied rentals, we scope the work around the hours and operations of whoever is inside. That might mean scheduling the panel outage for early morning, splitting the job across visits, or sequencing the circuits so only one section is down at a time. The goal is to do the work correctly without turning a repair into a disruption that costs more than the electrical problem did.
Here is what most people get wrong about their wiring: not every electrical fault starts inside the property. A voltage drop, an intermittent outage, or a problem that shows up on multiple circuits at once can originate at the utility connection rather than anywhere in the building's wiring. We check both sides.
When the diagnostic points past the meter and into the utility's infrastructure, we tell you plainly. That means explaining what the symptom is, where the boundary sits between the utility's responsibility and the property's, and what the next step looks like on their end. We do not charge for the diagnostic and then leave you guessing. If the fault is theirs, we say so and tell you how to report it. If there is work on our side that needs doing regardless, we scope that separately so you know what is ours and what is not. The options are set out on our page listing every electrical service.
A properly wired home is a safer home, and the price of getting there depends on what the job actually involves. Three things move a quote in either direction: what the fault turns out to be once it is traced, what has to be opened up to reach it, and whether the existing circuit or panel can carry the change without additional work upstream.
An outlet replacement on a modern circuit with accessible wiring is a different scope from the same outlet on aluminum branch wiring behind plaster. A dedicated circuit for a dryer is straightforward when the panel has room. When the panel is already at capacity, a load calculation comes first, and the answer to that shapes whether a subpanel or a full panel upgrade is part of the same job.
We offer no-pressure estimates, priced up front. When you call, we ask the questions that let us scope the job accurately, and you get a rate before anything is confirmed. If the scope changes once we are on site, we say so before the work changes.
Call (346) 954-9789 and ask what the job covers.
We are available every day from 7 AM to 8:30 PM, which covers most of the situations where an electrical fault shows up without warning during the day. When you call, we confirm what the schedule allows and set a time that works for the property. There is no online booking. The call is where the scope and the timing get settled.
Some electrical faults need attention before the next available appointment slot. A breaker that will not reset, a burning smell near the panel, or an outlet that sparks when used are not situations to wait out. We take prompt response seriously, even for last-minute electrical calls.
Call (346) 954-9789 and describe what you are seeing.
We will tell you how quickly we can get there and what to do in the meantime.
A panel that trips under normal load, runs warm, or has breakers that will not hold their rating is not a problem that corrects itself. Gulf Coast properties deal with heavy air-conditioning loads for months at a stretch, and a panel sized for a lighter era of electrical use may simply be undersized for what the property now demands. We handle panel replacement, breaker replacement, and the load calculations that tell us what size service the property actually needs.
Outdoor outlets on a property near the water take more punishment than interior ones. Salt air, humidity, and rain exposure work on connections over time. Weatherproof enclosures and GFCI protection at exterior locations are code requirements, and they are also the practical answer to an outdoor circuit that has to hold up in a coastal environment. We install and replace exterior outlets, enclosures, and the wiring behind them.
A refrigerator in a garage, a chest freezer, a window air-conditioning unit, or a large power tool all draw enough amperage that sharing a circuit with other loads leads to tripped breakers and shortened equipment life. A dedicated circuit isolates the load and sizes the wiring to match. We run dedicated circuits from the panel to wherever the appliance lives, including detached structures when a subpanel is part of the plan.
Smart switches and dimmers require a neutral wire at the switch box, and older wiring in many Galveston homes was run without one. We confirm what is in the box before any switch is ordered, and we handle the wiring correction if a neutral needs to be added. Dimmers also need to be matched to the fixture type. A dimmer paired with the wrong LED driver will buzz or flicker, and the fix is in the specification, not the installation.
Battery-operated alarms are a starting point, not a finish line. Hardwired alarms with battery backup stay active when the power goes out, and interconnected alarms mean that when one detects smoke or CO, every alarm in the building sounds. We wire and install hardwired alarm systems in new and existing construction, including the interconnect wiring that links them.
A 240-volt circuit for a range, wall oven, or dryer is not the same job as adding a standard outlet. The wire gauge, the breaker amperage, and the outlet type all depend on the appliance's specifications. We confirm those before the circuit is run. Where the panel does not have an open slot for the new breaker, we scope that conversation at the same time rather than leaving it for a second visit.
We serve Galveston and the communities nearby throughout Galveston County. If your property is in Jamaica Beach, Hitchcock, Tiki Island, Bayou Vista, or La Marque, we cover that ground.
Call (346) 954-9789 and we will confirm coverage for your address when you reach us.
We're ready to get your circuits working again, wherever in the county the property sits.
Older properties in Galveston frequently have wiring that was run before modern load requirements, GFCI protection, or AFCI requirements existed. That can mean undersized circuits, missing ground wires, unprotected bathroom and kitchen outlets, and panels that were not designed for the amperage a household draws today. An electrical inspection documents what is there and identifies what needs correction before it becomes a fault.
We map the panel before any work starts. That involves testing each breaker to identify which circuits it controls, then labeling the panel so every breaker is accounted for. This is part of the diagnostic process on any job where the panel labeling is missing or inaccurate.
Coastal conditions accelerate corrosion on outdoor connections, enclosures, and anything that is not rated for a wet or salt-air environment. Interior wiring is not directly affected by salt air, but outdoor outlets, service entrance hardware, and any wiring run through crawl spaces or exterior walls can show corrosion faster than the same installation inland. We check exposed connections and enclosures as part of any visit where they are relevant to the job.
Work areas are contained as much as the job allows. Where walls or ceilings are opened, we work in the affected area and avoid tracking debris through the rest of the property. The level of disruption depends on the method used to run new wiring, and we explain what to expect before the work starts.
The Gulf Coast sees frequent lightning and the voltage spikes that come with storm activity. A panel-level surge protector intercepts those spikes before they reach any circuit in the building, which matters for HVAC disconnect wiring, appliances, and anything else that stays plugged in during a storm. It works alongside, not instead of, proper grounding and bonding at the panel, and we check both when surge protection is part of the job. Call before the season starts rather than after the first strike.
Low-voltage landscape lighting typically runs from a transformer plugged into an outdoor outlet, but line-voltage path lights, driveway lights, and post lights require a proper outdoor circuit with weatherproof connections and correct circuit protection. We run the circuit from the panel, install weatherproof boxes, and confirm the grounding before any fixtures are connected.
The call is where the job starts. You describe what you are seeing or what you need, we scope it on the phone, and you get a price before anything is scheduled. The work ends with a test, a confirmed fix, and a tidy site. Code-compliant wiring on every job means the work is done to the standard that inspectors in this area enforce, and it holds up after we leave.
Call (346) 954-9789 for a quote. Pick up the phone and we'll get rolling.
Everywhere else we go is in our town-by-town list. We are also in: Hitchcock, La Marque, Texas City, San Leon.
Below is a quick look at the electrical work we handle throughout Galveston and the surrounding Galveston County area. Each service is scoped on the phone before anything is scheduled, so you know what the job involves and what it costs before we start.
Call (346) 954-9789 for a quote on any of the work listed here.
| Type of Work | Scope of Work | Best For | Things to Know |
|---|---|---|---|
| Lighting Installation | Recessed and pendant lightingOutdoor and security lightingMotion sensor and landscape lightsWeatherproof boxes and circuit protection | Homeowners updating interior lighting or adding exterior security and safety lighting | Outdoor fixtures in the Gulf Coast climate require weatherproof boxes and proper grounding to hold up through storm season. |
| Surge & Lightning Protection | Panel-level surge protector installationGrounding and bonding at the main panelWhole-home voltage spike protectionCoverage for all circuits in the building | Galveston County homes where thunderstorms and lightning are a regular seasonal hazard | A power strip protects only the devices plugged into it. Panel-level protection intercepts voltage spikes before they reach any circuit in the building. |
| Electrical Panel & Service Upgrades | Full panel replacementService entrance upgradesSubpanel installationLoad calculation for added circuits | Homes adding an EV charger, generator, or major appliance that the existing panel cannot carry | Permits are pulled when the job requires them. We confirm what applies at your address before the work is scheduled. |
Call (346) 954-9789 and we will walk you through what the job involves, confirm the price, and get it on the schedule.
(346) 954-9789